Student inspecting the cockpit of a car

MEng

Mechanical Engineering

This course is open for applications.

About this course

Entry year:
2018/19
Course code:
H301
Applications:
UCAS
Level:
Undergraduate
Tariff points:
128
Department:
Engineering Design and Mathematics
Campus:
Full-time: Frenchay, Part-time: Frenchay apart from year 1.2: City of Bristol College.
Duration:
Full-time: four years full-time; five years sandwich. Part-time day release programme available over five to six years.
Delivery:
Full-time; part-time; day release; sandwich
Programme leader:
Dr Tushar Dhavale (Full-time)
Dr Rohitha Weerasinghe (Part-time)
Key fact:
Get industry ready with this IMechE accredited degree that consistently achieves high graduate employment rates and is available to study on a day release basis.

Page last updated 3 November 2017

Introduction

Why study engineering?

Mechanical engineers play an important role in many of the products in the world around us. This involvement can range from design, manufacture and development, through to the management or marketing of products. With a degree in Mechanical Engineering, you will have the opportunity to use your skills in any sector you wish.

Why UWE Bristol?

MEng Mechanical Engineering is accredited by the Institution of Mechanical Engineers (IMechE).

Develop your understanding of stress analysis, dynamics, heat transfer, mechatronics, materials and manufacture, and maths. Learn to use industry standard software and gain plenty of hands-on experience testing theories in our well-equipped laboratories.

Choose your modules in a way that allows you to specialise, perhaps with your chosen career in mind. The extra year for MEng students includes group and individual projects which showcase all of your technical engineering knowledge.

Gain an inside track on the profession through factory visits and professional briefings with industry leading organisations across the UK.

You'll share modules with aerospace and automotive engineering students in your first year. This means that you can transfer onto one of these courses if your focus changes.

This course is developed alongside our partner employers to make sure you're industry ready when you graduate. They also provide you with placement opportunities, as well as advice on CV-writing, interview techniques and industry issues.

Where can it take me?

Mechanical engineers are sought after for traditional engineering jobs and the product development process. They  are also highly regarded in the world of financial business.

You'll also be in demand to help maximise usage of high capital plants and operations such as power stations, oil refineries and hospitals.

Watch: The learning and teaching experience

Accreditations and partnerships:

Structure

Content

The optional modules listed are those that are most likely to be available, but they may be subject to change.

Year one

You will study:

  • Stress and Dynamics
  • Engineering Mathematics
  • Design, Materials and Manufacturing
  • Fluid Dynamics
  • Energy and Thermodynamics.

Year two

You will study:

  • Design and Electromechanical Systems
  • Heat Transfer, Power and the Environment
  • Engineering Mathematics 2
  • Dynamics
  • Stress Analysis
  • Project Management.

Placement year (if applicable)

If you study on the five year (sandwich) course, you'll spend a year away from the University on a work or study placement after year two.

Depending on which you choose, you'll either complete a placement learning or learning and development module.

See the Placements and Fees sections for more information.

Year three

You will study:

  • Computational Methods
  • Individual Project MEng A.

Plus four optional modules from:

  • Composite Engineering or Mechanics of Materials
  • Energy Technologies or Thermofluid Systems
  • Materials and Structures for Special Applications
  • Integrated Electro-Mechanical Systems
  • Vibrational Dynamics
  • Control Engineering.

And one optional module from:

  • Business Environment
  • Industrial Placement.

Final year

You will study:

  • Individual Project MEng B
  • Master's Group Project
  • Innovations in Operations Management.

Plus four optional modules from:

  • Design of Fluid Systems
  • Structural Integrity in Design
  • Industrial Applications of Vision and Automation
  • Advanced Mechatronics
  • Advanced Control Engineering
  • Mechanics of Composites
  • Computational Fluid Dynamics
  • Concurrent Engineering and Design for Manufacture.

The University continually enhances our offer by responding to feedback from our students and other stakeholders, ensuring the curriculum is kept up to date and our graduates are equipped with the knowledge and skills they need for the real world. This may result in changes to the course. If changes to your course are approved, we will inform you.

This structure is for full-time students only. Part-time students study the same modules but the delivery pattern will be different.

Learning and Teaching

Learn through a mix of lectures and tutorials, experimental laboratory work, engineering fabrication, drawing and design, computing and application-based mini projects.

Make use of facilities including stress analysis, testing and materials selection, dynamics and vibration and thermofluids.

Experiment with energy conservation and control, aerodynamics (high speed and low speed wind tunnels), electronics and computing, manufacture, advanced manufacture and robotics.

Attend regular presentations from visiting professionals

to give you the inside track on industry challenges and opportunities. Visit our careers fairs and engineer 'speed dating' events that help you find work as soon as you graduate.

Get involved in national competitions and initiatives to boost your skills and experience. Some students volunteer their skills to help develop infrastructure in developing countries, through initiatives like Engineers without Borders. Others have had success with UWE Bristol teams in the Formula Student competition.

Showcase your work to employers and the public at our annual Environment and Technology degree show.

Take a look at recent students' work on our Pinterest board.

See our full glossary of learning and teaching terms.

Percentage of time you'll spend in different learning activities, per year.

YearScheduled learning and teaching studyIndependent studyPlacement study% check
129%71%0%100%
224%76%0%100%
319%81%0%100%
418%82%0%100%

Study time

You can study this course full-time over three (BEng) or four (MEng) years, or part-time on a day release basis.

Part-time study

Modules are structured to allow you to attend all your lectures and tutorial sessions on a single day each week, minimising the time you spend away from the workplace.

Dependent on entry qualifications, you'll generally complete the course within five years. A large proportion of our part-time students are supported by their employer.

A benefit of studying part-time is you'll be able to put your learning into practice and potentially use work-related problems in projects.

Assessment

You'll be assessed through a mix of examinations, assignments and group projects.

An individual project is a key assessment in the final two years.

See our full glossary of assessment terms.

Percentage of time you'll spend in different assessment methods, per year.

YearWritten exam assessmentCoursework assessmentPractical exam assessment% check
167%28%5%100%
256%43%1%100%
350%46%4%100%
425%63%12%100%

Features

Professional accreditation

This degree is accredited by The Institution of Mechanical Engineers (IMechE).

If you complete an IMechE accredited degree you will be deemed to have met part or all of the academic requirements for registration as a Chartered or Incorporated Engineer, putting you in a strong position to move on to achieve professional engineering status after a period of initial professional development in industry.

This MEng fully meets the academic requirements for registration as a Chartered Engineer (CEng). 

Placements

Students who get work experience tend to graduate with better degrees. Experience also hones your skills, industry knowledge and professional network, making you a sought after graduate.

If you choose the five year (sandwich) course, you'll spend a year away from the University on a work or study placement after year two.

Placements are available with our partner employers, as well as organisations across the region.

Past students have worked for the German Space Agency, Rolls Royce, Airbus and smaller regional consultancies. Many of these employers were so impressed with the calibre of our students that they employed them on graduation.

Get help to find your placement and support throughout from department staff and our award-winning careers service.

Read about past students' placements with our partner employers.

Fieldwork

You'll have an opportunity to see engineering in action at a range of facilities.

On factory visits, you'll receive a guided tour of the shop floor and attend a presentation from the host organisation.

Past visits have included Jaguar Land Rover, the National Composite Centre, Airbus and GKN.

Study facilities

Test your theories and develop engineering skills in our well-equipped laboratories.

Carry out stress analysis experimentation in our statics lab or consider moving based problems in our dynamics lab.

Experiment with industry-ready electro-mechanical machines and investigate heat transfer and engine performance using specialist equipment.

Develop practical skills in our rapid prototyping facility and machine shop.

Learn how to undertake finite element analysis (FEA), computational fluid dynamics (CFD) and computer-aided design (CAD) on our workstations equipped with industry standard software.

 A mix of traditional and hands-on learning environments helps you quickly take on essential knowledge and skills, standing you in good stead for your professional career.

Learn more about UWE Bristol's facilities and resources.

Careers

Careers / Further study

Your combined understanding of maths, science, technology, business and management can lead to a broad range of careers all over the world.

Consulting and contracting jobs are available in the design, implementation, operation and maintenance of equipment and machinery. These are in industries such as manufacturing, automotive, aerospace, pharmaceutical, energy and water.

If you're interested in business or commerce, a mechanical engineering degree is also highly regarded in finance, IT and management.

Read how an MEng degree and placement prepared Lawrence for an exciting future in Mechanical Engineering.

Get inspired

Our award-winning careers service will develop your employment potential through career coaching and find you graduate jobs, placements and global opportunities.

We can also help find local volunteering and community opportunities, provide support for entrepreneurial activity and get you access to employer events.

Visit our employability pages to learn more about careers, employers and what our students are doing six months after graduating.

Fees

Full time course

FeesAmount (£)
International-Full Time-Annual (Per Year) Fee12750
International-Full Time-Module Fee (15 Credit)1594

Full time course with placement year

FeesAmount (£)
International-Sandwich-Annual (Per Year) Fee12750
International-Sandwich-Full Annual Fee Following Placement Year12750
International-Sandwich-Module Fee (15 Credit)1594
International-Sandwich-Placement Year Fee1594
International-Sandwich-Reduced Annual Fee Following Placement Year11156

Indicative Additional Costs

FeesAmount (£)
Additional Course Costs - Full Time - Home/EU - Indicative Maximum Cost Per year150

Supplementary fee information

Your overall entitlement to funding is based on how long the course is that you're registered on. Standard funding is allocated based on the standard number of years that your course lasts, plus one additional year.

You'll apply for funding each year that you study and Student Finance will take into account how long the course is in each year that you apply. So if you register for the five year course and then transfer to the four year course, the number of years you can apply for funding will change. Student Finance will reassess your funding based on how many years you have been in study, not just those years for which you received student finance.

Always seek advice before taking any action that may have implications for your funding.

Learn more about funding.

Additional costs

Additional costs are for items you could need during your studies that aren't covered by the standard tuition fee. These could be materials, textbooks, travel, clothing, software or printing.

Learn more about costs.

Entry

Typical offers

  • Tariff points: 128
  • GCSE: For all applicants, Grade C/4 or above in English Language or equivalent and Grade B/5 or above in Mathematics. Please note the University does not accept Level 2 Key Skills, Functional Skills or Certificates in Adult Numeracy and Literacy as suitable alternatives to GCSEs.
  • A-level subjects: Grade B or above in Mathematics plus a pass in one of the following subjects: Biology; Chemistry; Computing/Computer Science; Design and Technology; Electronics; Engineering; ICT; Further Maths; Music Technology; Physics; Statistics. Points from A-Level General Studies and AS-Level subjects (not taken onto full A-Level) can be included towards the overall tariff. You must have a minimum of two A-Levels.
  • Specific subjects: Maths requirement can also be met by the Cambridge Pre-U Mathematics at Merit 3
  • EDEXCEL (BTEC) Diploma: One of the following BTEC Diplomas: Aeronautical Engineering; Applied Science; Construction and the Built Environment; Electrical / Electronic Engineering; Engineering; Land-based Technology; Manufacturing Engineering; Mechanical Engineering; or Operations and Maintenance Engineering. Must include Merit in one of the following units: Further Mathematics for Technicians; Further Engineering Mathematics; Further Mathematics for Construction and the Built Environment or Further Mathematics for Construction.
  • Access: Achievement of the HE Diploma; to include 30 Level 3 credits at Merit including 15 in Mathematics and 15 in another science or technology subject. Please list the units that you are taking in your application.
  • Baccalaureate IB: To include a minimum grade of 6 in higher level Mathematics and a pass at higher level in one of the following subjects: Biology, Chemistry, Computer Science, Design Technology, Physics, Environmental Systems and Societies

Entry requirements

If you do not meet the entry requirements of this course, you may be eligible for Foundation year entry onto this or other related degree courses.

UWE Bristol's International College
If you are an international student and do not meet the academic or English language requirements to study this course, you can qualify by completing preparatory study at our International College.

How to apply

Read more about undergraduate applications.

For further information

Unistats

UWE Main Campus

You might also like

Back to top